A-level fireproof insulation board adopts rock wool synthetic hydrophobic rock wool cloth, and then uses constant speed pendulum, uniform cotton cloth method, through the speed control of the crawler, the upper and lower crawler belts are pressed tightly, the rock wool board is pressed into a rock wool board, and the density of the rock wool board is determined by the crawler belt. The rotational speed and pendulum noil amount are determined. The thickness of the top should not be too large, otherwise it will be inconvenient to operate. The density of the rock wool board is controlled by the speed of the crawler and the amount of noil. The density of the rock wool board is determined by the speed of the track and the amount of the rock wool. In order to adapt to different construction processes, there are three single-color single guns and two-color multi-color guns to adapt to different construction processes and spray more ideal effects. Various specifications of nozzles: etc. Choose according to the needs of the sample.
These materials are stacked off the ground.
Judging from the current actual application situation, the outer wall material of rock wool board has good thermal insulation and fire resistance performance for buildings and the product during use, and the product quality can reach the standard during use. Low, it is used in buildings, but it is beneficial to the energy-saving renovation of exterior walls of buildings.
The smaller the nozzle, the more uniform the spray effect, the larger the particle size, the more points used, the finer the construction process of Erzhen Stone Paint, and the better the brushing effect. The positive angle and the decorative belt should be checked for pulling the wire above 0, and the large surface should also be checked diagonally, and then leveled with the plaster at the lower part of the chisel.
Generally speaking, the possibility of damage to the rock wool board is relatively small. Once installed, it can reach at least ten years of service life.
A-level fireproof insulation board makes the wall flatness reach the specified allowable deviation. After the base wall is treated by the above method, a small sample is pasted for inspection, and its specification shall not be less than 0000. The external field inspection method is as follows: ① After the thermal insulation and decoration integrated board is pasted, a layer of initial adhesion is formed, and the positioning piece will not be displaced by itself after the positioning part is removed; ② After pasting, the inspector cannot stick it with his bare hands.
Since the crack damage caused by the pressure is very accidental, the crack damage caused by the surface tension stress during the construction process is generally considered in the construction, which is suitable for ships. The metallurgical industry outer wall thermal insulation rock wool board material is fire-resistant and moisture-proof. Due to the high strength of the thermal insulation and decoration integrated board itself, the entire structure is relatively good, and there will be no temperature change during use, deformation caused by rain and other factors, so thermal insulation, The surface integrity of the decorative integrated board is better.
Class A fire insulation board
After the formwork is pulled out from the wall, it can be considered that the adhesive is blended well, and the strength of the base meets the construction requirements. The split elastic line is typeset according to the design requirements, and according to the size requirements, the degree of the separation seam is determined, and the construction surface is bounced back (pop-up stitching, For measurement and control), the cutting groove cuts the board according to the size requirements; brushes the interface agent; brushes one side of the thermal insulation decorative board.
With the continuous development of products, the use of thermal insulation products in people's lives has gradually increased, and thermal insulation products have brought convenience to people's lives in many aspects.
Sealant; adhesives are prepared on site. When the temperature in winter is lower than ℃, antifreeze should be added. Figure, coating with a radius of (~00) on the back of the TDD board. The bonding area shall not be less than 0%.
A-level fireproof insulation board facade rock wool insulation board Life application field Release time: Rock wool board insulation board is a kind of building material, which can play the role of heat preservation.
Century Avenue, Haicheng Economic Development Zone, Liaoning Province, China
Tel : 0412-3332277
Postcode : 114200
Fax : 0412-3332277
Pailou magnesite new material base in Haicheng City, Liaoning Province
Postcode : 114200
Tel : 0412-3332277